Chrome Carbide Castings – ASTM A532 Class III

High-Chromium White Iron for Severe Abrasion Service

Pacific Alloy Casting Company manufactures Chrome Carbide or Hi-Chrome castings in accordance with ASTM A532 Class III. Chrome Carbide is a high-chromium white iron alloy engineered for extreme abrasive wear environments where material longevity is critical.

Pacific Alloy Casting Company produces Chrome Carbide castings using controlled foundry processes focused on:

Castings are manufactured to customer specifications and application requirements.

Cast iron wear parts on a workbench
Molten metal glowing in a furnace
What Is Chrome Carbide Iron?

Chrome Carbide iron is a white cast iron alloyed with elevated chromium levels to promote the formation of hard chromium carbides throughout the microstructure. These carbides provide:

ASTM A532 Class III defines specific compositional and performance requirements within the high-chromium iron family.

Performance Characteristics of ASTM A532 Class III

Chrome Carbide castings produced to ASTM A532 Class III offer:

Compared to lower-alloy white irons, Chrome Carbide is often selected for applications with severe wear intensity.

Typical Applications for Chrome Carbide Castings

Pacific Alloy manufactures Chrome Carbide components used in industries such as:

These applications demand materials capable of maintaining dimensional integrity under sustained abrasion.

Foundry worker pouring molten metal
Abrasion-Resistant Cast Iron · 25% Chromium White Iron (Class III, Type A)
PropertyDetail
Common Name / Type25% Cr white cast iron; Class III Type A high-chromium white iron
Material ClassHigh-chromium white iron (abrasion- and corrosion-resistant)
Key CompositionC 2.0–3.3%, Cr 23.0–28.0%, Mo up to 1.5%, Mn up to 2.0%, Ni up to 2.0%, Si up to 1.5%
MicrostructureM₇C₃ chromium carbides in an austenitic or martensitic matrix; higher Cr content shifts more chromium into the matrix for corrosion resistance
Hardness — As-Cast~ 450–550 BHN
Hardness — Hardened (heat-treated)~ 550–600+ BHN (up to ~ 60 HRC)
Tensile StrengthLow / not a design parameter — used in compression and abrasion, not tension
Toughness / DuctilityLow; brittle — comparable to other white irons, with toughness tunable somewhat via matrix heat treatment
Standout PropertyCombines high abrasion resistance with notably better corrosion and oxidation resistance than lower-Cr white irons — the defining advantage of the 25% Cr grade
Heat TreatabilityYes — can be hardened and tempered; matrix can be set austenitic (as-cast, tougher) or hardened to martensite for maximum wear resistance
MachinabilityPoor. Hard carbides require grinding or CBN/diamond tooling; machine in soft/annealed condition before final hardening where possible, otherwise design for grinding only
WeldabilityPoor / not recommended. High crack sensitivity; if repair welding is unavoidable use high preheat and matched high-alloy electrodes. Avoid structural welding.
Corrosion / Oxidation ResistanceGood (best of the A532 family) — the high chromium provides meaningful resistance to corrosive slurries, acidic conditions, and elevated-temperature oxidation
Relative CostHigher — the richest-alloy grade in the A532 family, generally the most expensive of the white irons here
Section-Size SensitivityModerate — heavier sections may need controlled heat treatment to develop uniform hardness through the cross-section
Best-Fit ApplicationsCorrosive and abrasive slurry pumps, brick and ceramic dies, mining and mineral processing wear parts, flue-gas and FGD components, pump volutes and impellers handling aggressive media, and high-temperature abrasive environments
Not Recommended ForTensile/structural load-bearing parts, weld-fabricated assemblies, high-impact shock loading, or parts requiring extensive post-cast machining
Chrome Carbide vs. Other Abrasion-Resistant Irons

Chrome Carbide (ASTM A532 Class III) is commonly evaluated alongside:

Material selection depends on abrasion severity, impact loading, and operating conditions.

For a broader comparison, see the Abrasion-Resistant Cast Irons ASTM A532 overview.

Polished cast metal P logo piece

Contact

Discuss Your Chrome Carbide Casting Requirements

If your application specifies ASTM A532 Class III or requires Chrome Carbide iron for severe abrasion service, Pacific Alloy is ready to help.

Discuss Your Casting Requirements

📞 562-928-1387

✉️ sales@pacificalloy.com

Early-stage discussions welcome. NDAs available.