Pacific Alloy Casting Company manufactures Chrome Carbide or Hi-Chrome castings in accordance with ASTM A532 Class III. Chrome Carbide is a high-chromium white iron alloy engineered for extreme abrasive wear environments where material longevity is critical.
Pacific Alloy Casting Company produces Chrome Carbide castings using controlled foundry processes focused on:
Castings are manufactured to customer specifications and application requirements.
Chrome Carbide iron is a white cast iron alloyed with elevated chromium levels to promote the formation of hard chromium carbides throughout the microstructure. These carbides provide:
ASTM A532 Class III defines specific compositional and performance requirements within the high-chromium iron family.
Chrome Carbide castings produced to ASTM A532 Class III offer:
Compared to lower-alloy white irons, Chrome Carbide is often selected for applications with severe wear intensity.
Pacific Alloy manufactures Chrome Carbide components used in industries such as:
These applications demand materials capable of maintaining dimensional integrity under sustained abrasion.
| Property | Detail |
|---|---|
| Common Name / Type | 25% Cr white cast iron; Class III Type A high-chromium white iron |
| Material Class | High-chromium white iron (abrasion- and corrosion-resistant) |
| Key Composition | C 2.0–3.3%, Cr 23.0–28.0%, Mo up to 1.5%, Mn up to 2.0%, Ni up to 2.0%, Si up to 1.5% |
| Microstructure | M₇C₃ chromium carbides in an austenitic or martensitic matrix; higher Cr content shifts more chromium into the matrix for corrosion resistance |
| Hardness — As-Cast | ~ 450–550 BHN |
| Hardness — Hardened (heat-treated) | ~ 550–600+ BHN (up to ~ 60 HRC) |
| Tensile Strength | Low / not a design parameter — used in compression and abrasion, not tension |
| Toughness / Ductility | Low; brittle — comparable to other white irons, with toughness tunable somewhat via matrix heat treatment |
| Standout Property | Combines high abrasion resistance with notably better corrosion and oxidation resistance than lower-Cr white irons — the defining advantage of the 25% Cr grade |
| Heat Treatability | Yes — can be hardened and tempered; matrix can be set austenitic (as-cast, tougher) or hardened to martensite for maximum wear resistance |
| Machinability | Poor. Hard carbides require grinding or CBN/diamond tooling; machine in soft/annealed condition before final hardening where possible, otherwise design for grinding only |
| Weldability | Poor / not recommended. High crack sensitivity; if repair welding is unavoidable use high preheat and matched high-alloy electrodes. Avoid structural welding. |
| Corrosion / Oxidation Resistance | Good (best of the A532 family) — the high chromium provides meaningful resistance to corrosive slurries, acidic conditions, and elevated-temperature oxidation |
| Relative Cost | Higher — the richest-alloy grade in the A532 family, generally the most expensive of the white irons here |
| Section-Size Sensitivity | Moderate — heavier sections may need controlled heat treatment to develop uniform hardness through the cross-section |
| Best-Fit Applications | Corrosive and abrasive slurry pumps, brick and ceramic dies, mining and mineral processing wear parts, flue-gas and FGD components, pump volutes and impellers handling aggressive media, and high-temperature abrasive environments |
| Not Recommended For | Tensile/structural load-bearing parts, weld-fabricated assemblies, high-impact shock loading, or parts requiring extensive post-cast machining |
Chrome Carbide (ASTM A532 Class III) is commonly evaluated alongside:
Material selection depends on abrasion severity, impact loading, and operating conditions.
For a broader comparison, see the Abrasion-Resistant Cast Irons ASTM A532 overview.
If your application specifies ASTM A532 Class III or requires Chrome Carbide iron for severe abrasion service, Pacific Alloy is ready to help.
Discuss Your Casting Requirements
📞 562-928-1387
✉️ sales@pacificalloy.com
Early-stage discussions welcome. NDAs available.